Direct Delivery · Made in Gainesville FLSHOP

Made in Gainesville. Built for everywhere.

LED edge-lit signs, custom event decor, tabletop gaming gear, leather-patch hats, and parametric wall art: ready to ship or made to order.

READY TO SHIP · MADE TO ORDER · LASER · CNC · LED

Laser-cut · engraved · assembled · North Central FloridaFree shipping on qualifying orders

07.1COLLECTIONS

THRESHOLD · THE CUT

Parametric CNC-cut hardwood slat wall panel with a concentric wave relief

ShopSabre 510 Pro · contoured rib panels

Parametric & Dimensional Wall Work

Sculpture that happens to hang flat. Contoured ribs and carved relief fields cut on the ShopSabre, from a single accent panel to a twenty-foot feature wall — the same toolpaths, scaled to the room.

07.1 · EXHIBIT A

07.1.1

Rib walls & feature panels

Stacked contoured fins that read as a rippling surface from across a room and as precise machining up close. Sized to the wall, finished raw or painted to your palette.

07.1.2

Carved relief panels

Deep three-dimensional carving into solid hardwood — botanicals, wildlife, monograms, whatever the drawing is. Cut in a recessed field with a solid-wood border.

07.1.3

Address & number sets

The panel language scaled down to a house number or a suite marker — layered wood and brass, cut to match the piece it hangs beside.

How it is built

Contoured ribsDeep 3D reliefMDF & Baltic birchRaw or shop-paintedDesign-your-own

Interior designersHospitality & retailHomeowners with a blank wall

Design your panel

Curved parametric rib wall relief washed in cyan, green and magenta light

Hardwood panel CNC-carved in deep relief with dragonflies among reeds and cattails

Hardwood parametric wave wall panel beside two vertical address plaques with white numerals

Large cut-panel Spirit Lake entry arch with ornate letterforms lit red between faux-stone pylons at night

Gold faceted hexagonal LED headboard panel with glowing white triangle inlays above a bed

CO2 laser · LED integration

Illuminated & Edge-Lit

Light designed in from the start, not stuck on afterwards. Backlit facet panels, edge-lit acrylic, and LED built into the millwork so the glow reads as part of the piece.

07.2 · EXHIBIT B

07.2.1

Backlit feature panels

Faceted and layered wall pieces with the LED buried behind the surface — inlaid lines glow, and a soft halo washes the wall behind the panel.

07.2.2

Freestanding illuminated signs

Full-colour LED and edge-lit lettering built into a frame that rolls — for a bar, a booth, or an event that needs the sign somewhere different every night.

07.2.3

LED integrated into millwork

Under-cabinet and reveal lighting run inside the casework we build, so the wiring never shows and the throw is aimed where you actually want it.

Light we build with

Edge-lit acrylicHalo backlightRGB & tunable whiteDiffused LED channelIntegrated in millwork

Bars & tap roomsHospitality interiorsResidential feature walls

Gold faceted wall panel with glowing white triangle inlays and an LED halo in a dark bedroom

Freestanding BAZAR LED letter sign glowing magenta to cyan behind a greenery hedge panel on casters

Figured-veneer kitchen with violet LED strip lighting washing the marble backsplash from under the upper cabinets

Illuminated cut-panel entry arch outlined in bulbs beside painted totem markers under magenta and cyan uplit trees

Custom walnut media console with brass pulls and a red LED-lit vinyl record bay beneath a wall-mounted TV

Hardwood ply · solid walnut, maple, oak

Consoles, Cabinetry & Furniture

Casework built around the equipment list, not around a catalogue dimension. Record and DJ consoles, fitted kitchens, and butcher block — templated, machined, finished, and installed.

07.3 · EXHIBIT C

07.3.1

Record & DJ consoles

High-capacity vinyl storage and hinged-lid decks cut to your turntables, mixer, and monitors. The lid drops and it reads as furniture again.

07.3.2

Fitted cabinetry

Full-height slab-front runs in figured veneer and hardwood, book-matched across the uppers, with hardware set to the millimetre.

07.3.3

Butcher block & countertops

Maple, walnut, cherry, and acacia tops — templated on site, profiled and sink-cut on the router, oiled and set.

How we work

Measured on siteCut to your gearHand-finishedInstalled by usHardwood & veneer

Producers & DJsInterior designersResidential renovationsCommercial fitouts

See the millwork shop

Custom walnut DJ console with a hinged lid open over recessed turntables and a mixer, LED accent glow inside the bay

Installed kitchen run with book-matched figured veneer slab cabinets, quartz counter and stainless appliances

Acacia butcher block countertop installed over white shaker base cabinets

Rosewood-toned figured veneer kitchen cabinetry with long stainless bar pulls

Figured hardwood slab kitchen run against a white glossy backsplash with quartz countertop

Night view of a galley kitchen with full-height walnut veneer uppers over a white quartz counter and undermount sink

Pair of custom wood sliding barn doors on exposed track hardware

Custom arched-panel double entry doors with a transom, painted deep red

Maple edge-grain board laser-engraved with a wildflower meadow and script names, propped against a tiled backsplash

CO2 & fiber laser

Engraved & Personalized

The names-and-dates work: boards, signs, and marked metal. A wedding gift and a thousand-piece brand run come off the same two lasers, and the setup is the same either way.

07.4 · EXHIBIT D

07.4.1

Personalized boards

Hardwood serving and cutting boards engraved with names, dates, maps, and line art. Finished with food-safe oil and ready to hand over.

07.4.2

Name signs & room pieces

Cut-out script and dimensional lettering for nurseries, weddings, and businesses — CNC-cut and painted to the room’s palette, ready to hang flush.

07.4.3

Marked metal & branding

Fiber-laser marking on stainless and anodized stock — business cards, tags, and plates that survive a pocket and still read after a decade.

What we mark

HardwoodLeatherStainlessAcrylicAnodized aluminium

Wedding & housewarming giftsVenue & brand merchSmall-batch wholesale

CNC & laser services

Acacia serving paddle laser-engraved with a Florida state outline, a heart marker and a couple’s names

Custom cut wood script name sign mounted on a nursery wall above a brass crib

Bench-top lineup of carved alligator relief boards in walnut, blond ash and turquoise resin finishes

Carved relief · Florida signature

The Gator Collection

Our own line, and the one people drive across the county for. Full-length alligators carved in relief down a hardwood board, in every finish the shop runs — bare ash through resin-flooded.

07.5 · EXHIBIT E

07.5.1

Carved relief boards

A full-length gator raised out of the face of the board — ridged tail, scute back, modelled head — with the eye and jaw line filled in black epoxy.

07.5.2

Carved gator forms

Off the board entirely: sculpted heads and scute studies carved solid, sanded through the grits, and finished high-gloss.

Finishes

Blond ashWalnut stainTinted resin fillBlack epoxy detailFood-safe oil

Gainesville & Gator faithfulWedding & closing giftsLocal retail stockists

Maple and cherry serving board carved in relief with a full-length alligator, eye and jaw filled with black epoxy

Three carved hardwood alligator forms — a snout section, a scute dome and a full head — finished high-gloss

Two large diamond kinetic spinner sculptures, one matte black and one mirrored with blue LED glow, suspended in an event hall

Laser-cut kits · one-off builds

Sculpture, Props & Kits

The pieces that do not fit a category, which is usually why they end up here. Kinetic hangings, slot-together skeleton kits, and one-off props cut on whatever machine the drawing needs.

07.6 · EXHIBIT F

07.6.1